Banner Login - Cisco Small Business 300 1.1 Series Administration Manual

User Interface Commands
78-20269-01 Command Line Interface Reference Guide
1 1 gi1-39,Po1,Po2,
2 2 gi1
10 v0010 gi1
11 V0011 gi1,gi3
20 20 gi1
30 30 gi1,gi3
31 31 gi1
91 91 gi1,gi4
4093 guest-vlan gi1,gi3
console(config)#
2.17

banner login

Use the banner login command in Global Configuration mode to specify a
message to be displayed before the username and password login prompts. This
banner is applied automatically on all the CLI interfaces: Console, Telnet and SSH
and also on the WEB GUI. Use the no form of this command to delete the existing
login banner.
Syntax
banner login d message-text d
no banner login
Parameters
•
d—Delimiting character of user's choice—a pound sign (#), for example.
You cannot use the delimiting character in the banner message.
•
message-text—Message text. The message must start on a new line. You
can enter multi-line messages. You can include tokens in the form of
$(token) in the message text. Tokens are replaced with the corresponding
configuration variable (see User Guidelines). The message can contain up
to 1000 characters (after every 510 characters, you must press <Enter> to
continue).
Default Configuration
Disabled (no Login banner is displayed).
other Required
dynamicGvrp Required
permanent Not Required
permanent Required
permanent Required
permanent Required
permanent Required
permanent Required
permanent Guest
2
46