Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
21.22 storm-control include-multicast
Use the storm-control include-multicast Interface Configuration mode command
to count multicast packets in the broadcast storm control. Use the no form of this
command to disable counting of multicast packets in the broadcast storm control.
Syntax
storm-control include-multicast
no storm-control include-multicast
Parameters
N/A
unknown-unicast—Specifies also the count of unknown unicast packets.
Default Configuration
Disabled
Command Mode
Interface Configuration mode (Ethernet)
User Guidelines
The command smartport storm-control include-multicast has the same
functionality except that it does not return an error (and does not configure
anything) when executing it for a port-channel
Example
console(config)# interface gi1
console(config-if)# storm-control include-multicast
21.23 show storm-control
Use the show storm-control EXEC mode command to display the configuration of
storm control.
Syntax
[interface-id]
show storm-control
[unknown-unicast]
21
293