Cisco Small Business 300 1.1 Series Administration Manual page 304

Power over Ethernet (PoE) Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
show power inline consumption
Parameters
Interface-id—Specifies an interface ID. The interface ID must be an Ethernet port.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
Example
The following example displays information about the inline power consumption.
Console# show power inline consumption
Port Power Limit(W)
---- -------------
gi1 15.4
gi2 15.4
gi3 15.4
[interface-id]
Power (W) Voltage(V)
---------- ---------
4.115 50.8
4.157 50.7
4.021 50.9
23
Current(mA)
------------
81
82
79
305