Line Commands; Line; Speed - Cisco Small Business 300 1.1 Series Administration Manual

Line Commands

13
Line Commands
78-20269-01 Command Line Interface Reference Guide
13.1

line

The line Global Configuration mode command identifies a specific line for
configuration and enters the Line Configuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console—Enters the console terminal line mode.
•
telnet—Configures the device as a virtual terminal for remote console
access (Telnet).
•
ssh—Configures the device as a virtual terminal for secured remote
console access (SSH).
Command Mode
Global Configuration mode
Example
The following example configures the device as a virtual terminal for remote
(Telnet) console access.
Console(config)# line telnet
Console(config-line)#
13.2

speed

The speed Line Configuration mode command sets the line baud rate. Use the no
form of this command to restore the default configuration.
Syntax
bps
speed
no speed
13
180