Cisco Small Business 300 1.1 Series Administration Manual page 642

Smartport Commands
78-20269-01 Command Line Interface Reference Guide
Examples
Example 1—Note that Smartport on switch and phone types was configured
automatically. Smartport on routers was configured statically.
console>show macro auto ports
Smartport is enabled
Administrative Globally Auto Smartport is enabled
Operational Globally Auto Smartport is enabled
Interface Auto Smartport
Admin State
----------- --------------
gi1 disabled
gi2 enabled
gi3 enabled
gi4 enabled
gi5 enabled
gi6 enabled
Example 2—Disabling auto SmartPort on gi2:
console(config-if)#interface gi2
console(config-if)#no macro auto smartport
console(config-if)#end
console#show macro auto ports gi2
SmartPort is Enabled
Administrative Globally Auto SmartPort is controlled
Operational Globally Auto SmartPort is enabled
Auto SmartPort is disabled on gi2
Persistent state is not-persistent
Interface type is default
No macro has been activated
Example 3—Enabling auto Smartport on gi 1 :
Persistent Smartport Type
State
----------- ---------------
enabled switch
enabled default
disabled phone
enabled router (static)
enabled switch
enabled unknown
43
644