Wrr-Queue - Cisco Small Business 300 1.1 Series Administration Manual

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
This is an example of the output from the show qos interface policer command.
Console> show qos interface policer gi1
Ethernet gi1
Class map: A
Policer type: aggregate
Commited rate: 192000 bps
Commited burst: 9600 bytes
Exceed-action: policed-dscp-transmit
Class map: B
Policer type: single
Commited rate: 192000 bps
Commited burst: 9600 bytes
Exceed-action: drop
Class map: C
Policer type: none
Commited rate: N/A
Commited burst: N/A
Exceed-action: N/A
This is an example of the output from the show qos interface rate-limit command.
Console> show qos interface rate-limit
Port rate-limit [kbps]
----- -----------------
gi1 1000

41.27 wrr-queue

Use the wrr-queue Global Configuration mode command to enable the tail-drop
mechanism on an egress queue. Use the no form of this command to disable the
tail-drop mechanism on an egress queue.
gi
1
Burst [KBytes]
--------------
512K
41
585