Lldp Med Network-Policy (Global) - Cisco Small Business 300 1.1 Series Administration Manual

Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
lldp med fast-start repeat-count
no lldp med fast-start repeat-count
Parameters
number
repeat-count
being sent during the activation of the fast start mechanism. The range is 1-10.
Default Configuration
3
Command Mode
Global Configuration mode
Example
console(config)# lldp med fast-start repeat-count 4

44.16 lldp med network-policy (global)

Use the lldp med network-policy Global Configuration mode command to define a
LLDP MED network policy. For voice applications, it is simpler to use
network-policy voice
The lldp med network-policy command creates the network policy, which is
attached to a port by
The network policy defines how LLDP packets are constructed.
Use the no form of this command to remove LLDP MED network policy.
Syntax
lldp med network-policy
untagged}] [up priority] [dscp value]
no lldp med network-policy
Parameters
•
number—Network policy sequential number. The range is 1-32.
number
—Specifies the number of times the fast start LLDPDU is
auto.
lldp med network-policy
number application [vlan vlan-id] [vlan-type {tagged |
number
(interface).
44
lldp med
660