Table of Contents
Advertisement
CDP Commands
78-20269-01 Command Line Interface Reference Guide
Power Available TLV: Request-ID is 1 Power management-ID is 1;
Interface TLV: gi2
CDP is disabled on
gi
Interface TLV: gi3
CDP is enabled on
3
gi
Ethernet
3 is down
gi
45.21 show cdp traffic
The show cdp traffic Privileged EXEC mode command displays the CDP counters,
including the number of packets sent and received and checksum errors.
Syntax
show cdp traffic
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switch#show cdp traffic
CDP counters:
Total packets output: 81684,
Hdr syntax:
0, Chksum error: 0, Encaps: 0
No memory:
0, Invalid packet: 0
CDP version 1 advertisements output:
CDP version 2 advertisements output:
Available-Power is 10;
Management-Power-Level is 0xFFFFFFFF
2
Input: 81790
100,
Input
0
81784,
Input
0
45
704
Advertisement
Table of Contents
