Show Interfaces Counters - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
EXEC mode
Example
The following example displays the description of all configured interfaces.
Console# show interfaces description
Port Descriptions
gi1 ---------------------------------------------
gi2 Port that should be used for management only
gi3
gi4
PO Description
---- -----------
Po1 Output

21.18 show interfaces counters

Use the show interfaces counters EXEC mode command to display traffic seen by
all the physical interfaces or by a specific interface.
Syntax
show interfaces counters
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Example
The following example displays traffic seen by all the physical interfaces.
[interface-id]
21
287