Cdp Device-Id Format; Cdp Timer; Cdp Log Mismatch Native - Cisco Small Business 300 1.1 Series Administration Manual

CDP Commands
78-20269-01 Command Line Interface Reference Guide
console(conf-if) cdp log mismatch native

45.11 cdp device-id format

The cdp device-id format Global Configuration mode command specifies the
format of the Device-ID TLV. The no format of this command returns to default.
Syntax
cdp device-id format {mac | serial-number}
no cdp device-id format
Parameters
mac—Specifies that the Device-ID TLV contains the device's MAC address.
serial-number—Specifies that Device-ID TLV contains the device's hardware
serial number.
Default Configuration
MAC address is selected by default.
Command Mode
Global Configuration mode
Example
console(conf) cdp device-id format serial-number

45.12 cdp timer

The cdp timer Global Configuration mode command specifies how often CDP
packets are transmitted. The no format of this command returns to default.
Syntax
cdp timer seconds
no cdp timer
45
689