Autobaud - Cisco Small Business 300 1.1 Series Administration Manual

Line Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
bps—Specifies the baud rate in bits per second (bps). Possible values are 2400,
4800, 9600, 19200, 38400, 57600, and 115200.
Default Configuration
The default speed is 115200 bps.
Command Mode
Line Configuration (console) mode
User Guidelines
The configured speed is applied when Autobaud is disabled. This configuration
applies to the current session only.
Example
The following example configures the line baud rate as 9600 bits per second.
Console(config-line)#
13.3

autobaud

The autobaud Line Configuration mode command sets the line for automatic baud
rate detection (autobaud). Use the no form of this command to disable automatic
baud rate detection.
Syntax
autobaud
no autobaud
Default Configuration
Automatic baud rate detection is enabled.
Command Mode
Line Configuration mode
speed 9600
13
181