Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
If the queue parameter is all, traffic in cascading ports is also counted.
Example
The following example enables QoS statistics for output queues for counter set 1.
Console(config)#
qos statistics queues
41.42 show qos statistics
Use the show qos statistics EXEC mode command to display Quality of Service
statistical information.
Syntax
show qos statistics
Command Mode
EXEC mode
User Guidelines
Up to 16 sets of counters can be enabled for policers. The counters can be
enabled in the creation of the policers.
Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues.
1
all all all
41
598