Table of Contents
Advertisement
Clock Commands
78-20269-01 Command Line Interface Reference Guide
Examples
The following example authenticates key 8.
Console(config)#
sntp trusted-key
Device(config)# sntp authentication-key 8 md5 ClkKey
Device(config)# sntp trusted-key 8
Device(config)# sntp authenticate
6.9
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables
Simple Network Time Protocol (SNTP) Broadcast clients. Use the no form of this
command to disable SNTP Broadcast clients.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp broadcast client enable Interface Configuration mode command to
enable the SNTP Broadcast client on a specific interface.
After entering this command, you must enter
run.
Example
The following example enables SNTP Broadcast clients.
s
Console(config)#
sntp broadcast client enable
8
clock source
6
for the command to be
106
Advertisement
Table of Contents
