Table of Contents
Advertisement
Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following example defines a class map called Class1. Class1 contains an ACL
called enterprise. Only traffic matching all criteria in enterprise belong to the class
map.
Console(config)#
class-map
Console(config-cmap)#
41.7
policy-map
A policy map contains one or more class maps and an action that is taken if the
packet matches the class map. Policy maps may be bound to ports/port-channels.
Use the policy-map Global Configuration mode command to creates a policy map
and enter the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
This command is only available when QoS is in advanced mode.
Syntax
policy-map-name
policy-map
policy-map-name
no policy-map
Parameters
policy-map-name—Specifies the policy map name.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
Use the policy-map Global Configuration mode command to specify the name of
the policy map to be created, added to, or modified before configuring policies for
classes whose match criteria are defined in a class map.
Entering the policy-map Global Configuration mode command also enables
configuring or modifying the class policies for that policy map. Class policies in a
class1
enterprise
match access-group
41
563
Advertisement
Table of Contents
