Cisco Small Business 300 1.1 Series Administration Manual page 291

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
storm-control broadcast level {
no storm-control broadcast level
Parameters
level - Suppression level in percentage. Block the flooding of storm packets when
the value specified for level is reached. (Range 1 -100)
kbps—Maximum of kilobits per second of broadcast traffic on a port. (Range
8500–10000000)
Default Configuration
level - 10%
kbps—10% of port speed in Kbps
Command Mode
Interface Configuration mode (Ethernet)
User Guidelines
Use the storm-control broadcast enable Interface Configuration command to
enable storm control.
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
The command smartport storm-control broadcast level has the same functionality
except that it does not return an error (and does not configure anything) when
executing it for a port-channel.
Example
console(config)# interface gi1
console(config-if)# storm-control broadcast level 50 kbps 12345
level kbps
| kbps }
21
292