Cisco Small Business 300 1.1 Series Administration Manual page 19

Introduction
78-20269-01 Command Line Interface Reference Guide
Console#
Console# configure
Console(config)# interface range gi1-5
Console(config-if)#speed 10
Console(config-if)#exit
Console(config)#
The exit command returns to Global Configuration mode.
The following submodes are available:
•
Interface — Contains commands that configure a specific interface (port,
VLAN, port channel, or tunnel) or range of interfaces. The Global
Configuration mode command interface is used to enter the Interface
Configuration mode. The interface Global Configuration command is used
to enter this mode.
•
Line Interface — Contains commands used to configure the management
connections for the console, Telnet and SSH. These include commands such
as line timeout settings, etc. The line Global Configuration command is used
to enter the Line Configuration command mode.
•
VLAN Database — Contains commands used to configure a VLAN as a
whole. The vlan database Global Configuration mode command is used to
enter the VLAN Database Interface Configuration mode.
•
Management Access List — Contains commands used to define
management access-lists. The management access-list Global
Configuration mode command is used to enter the Management Access
List Configuration mode.
•
Port Channel — Contains commands used to configure port-channels; for
example, assigning ports to a port-channel. Most of these commands are
the same as the commands in the Ethernet interface mode, and are used to
manage the member ports as a single entity. The interface port-channel
Global Configuration mode command is used to enter the Port Channel
Interface Configuration mode.
•
QoS — Contains commands related to service definitions. The qos Global
Configuration mode command is used to enter the QoS services
configuration mode.
1
20