Dot1X Timeout Quiet-Period - Cisco Small Business 300 1.1 Series Administration Manual

802. 1 x Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
3600
Command Mode
Interface Configuration (Ethernet) mode
Example
console(config)# interface gi1
console(config-if)# dot1x timeout reauth-period 5000
20.6

dot1x timeout quiet-period

Use the dot1x timeout quiet-period Interface Configuration (Ethernet) mode
command to set the time interval that the device remains in a quiet state following
a failed authentication exchange (for example, the client provided an invalid
password). Use the no form of this command to restore the default configuration.
Syntax
dot1x timeout quiet-period
no dot1x timeout quiet-period
Parameters
seconds—Specifies the time interval in seconds that the device remains in a quiet
state following a failed authentication exchange with the client. (Range: 30–65535
seconds)
Default Configuration
The default quiet period is 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
During the quiet period, the device does not accept or initiate authentication
requests.
seconds
20
253