Cisco Small Business 300 1.1 Series Administration Manual page 21

Introduction
NOTE
78-20269-01 Command Line Interface Reference Guide
Example — Create passwords for level 7 and 15 (by the administrator)
Console>configure
Console<conf># enable password level 7 level7@abc
Console<conf># enable password level 15 level15@abc
Console<conf>#
Create a user with user level 1:
Console>
Console> username john password john1234 privilege 1
Console>
Example 2— Switch between Level 1 to Level 15. The user must know the
password.
Console>
Console> enable
Enter Password: ****** (this is the password for level 15
- level15@abc)
Console>
If authentication of passwords is performed on RADIUS or TACACS+ servers, the
passwords assigned to user level 7 and user level 15 must be configured on the
external server and associated with the $enable7$ and $enable15$ user names,
respectively. See the
Commands chapter for details.
Authentication, Authorization and Accounting (AAA)
1
22