Cisco Small Business 300 1.1 Series Administration Manual page 320

Port Channel Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
show interfaces port-channel
Parameters
interface-id—Specify an interface ID. The interface ID must be a Port Channel.
Command Mode
EXEC mode
Example
The following example displays information on all port-channels.
console# show interfaces port-channel
Load balancing: src-dst-mac.
Gathering information...
Channel Ports
------- -----
Po1 Active: gi1,Inactive: gi2-3
Po2 Active: gi5 Inactive: gi4
console# show interfaces switchport gi1
Gathering information...
Name: gi1
Switchport: enable
Administrative Mode: access
Operational Mode: down
Access Mode VLAN: 1
Access Multicast TV VLAN: none
Trunking Native Mode VLAN: 1
Trunking VLANs Enabled: 1
[interface-id]
2-4094 (Inactive)
26
321