Table of Contents
Advertisement
Green Ethernet
78-20269-01 Command Line Interface Reference Guide
Parameters
N/A
Default Configuration
Enabled
Command Mode
Interface configuration mode (Ethernet)
User Guidelines
Energy-Detect can work only when the port is copper. When a port is enabled for
auto selection copper/fiber Energy-Detect cannot work.
It takes the PHY ~5 seconds to fall into sleep mode when the link is lost after
normal operation.
Example
console(config)# interface gi1
console(config-if)# green-ethernet energy-detect
25.3
show green-ethernet
Use the show green-ethernet Privileged EXEC mode command to show
green-ethernet configuration and information.
Syntax
show green-ethernet
Parameters
interface-id
—Specifies an interface ID. The interface ID must be an Ethernet port.
Parameters Range
Default. When no interface is specified, this command shows information for all
interfaces.
[interface-id]
25
314
Advertisement
Table of Contents
