Show Ports Security Addresses - Cisco Small Business 300 1.1 Series Administration Manual

Address Table Commands
78-20269-01 Command Line Interface Reference Guide
gi2 Disabled Max-
Addresses
gi3 Enabled Lock
The following table describes the fields shown above.
Field Description
Port The port number.
Status The port security status. The possible values are:
Enabled or Disabled.
Mode The port security mode.
Action The action taken on violation.
Maximum The maximum number of addresses that can be
associated on this port in the Max-Addresses mode.
Trap The status of SNMP traps. The possible values are:
Enable or Disable.
Frequency The minimum time interval between consecutive
traps.

27.29 show ports security addresses

Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses [
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
- 28 -
Discard, 8 Disabled -
Shutdown
interface-id
27
-
356