Cisco Small Business 300 1.1 Series Administration Manual page 665

Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
gi5 RX,TX D,
gi6 RX,TX PD, SN, SD, SC
gi7 RX,TX PD, SN, SD, SC
gi8 RX,TX PD, SN, SD, SC
Example 2 - Display LLDP configuration for port 1.
Switch# show lldp configuration gi1
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Notifications interval: 5 seconds
LLDP packets handling: Filtering
Port State Optional TLVs
-------------- -------------- ------------------------
gi1 RX, TX PD, SN, SD, SC
802.3 optional TLVs: 802.3-mac-phy, 802.3-lag, 802.3-max-frame-size
802.1 optional TLVs
PVID: Enabled
PPVIDs: 0, 1, 92
VLANs: 1, 92
Protocols: 802.1x
SN, SD, SC automatic
auto vlan 1
auto g1
auto ch1
Address
72.16.1.1
Disabled
Disabled
Disabled
Disabled
Notifications
Disabled
44
667