Negotiation - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
•
full—Forces full-duplex operation.
Default Configuration
The interface operates in full duplex mode.
Command Mode
Interface Configuration (Port-channel) mode
Example
The following example configures gi5 to operate in full duplex mode.
Console(config)#
interface gi5
Console(config-if)#
21.7

negotiation

Use the negotiation Interface Configuration (Ethernet, Port-channel) mode
command to enable auto-negotiation operation for the speed and duplex
parameters of a given interface. Use the no form of this command to disable
auto-negotiation.
Syntax
capability
negotiation [
no negotiation
Parameters
capability—Specifies the capabilities to advertise. (Possible values: 10h, 10f,
100h,100f, 1000f). If unspecified, defaults to list of all the capabilities of the port.
Default Configuration
Auto-negotiation is enabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
duplex full
capability2 capability5
[ ... ]]
21
278