Web Server Commands; Ip Http Server; Ip Http Timeout-Policy - Cisco Small Business 300 1.1 Series Administration Manual

Web Server Commands

11
Web Server Commands
78-20269-01 Command Line Interface Reference Guide
11.1

ip http server

The ip http server Global Configuration mode command enables configuring and
monitoring the device from a web browser. Use the no form of this command to
disable this function.
Syntax
ip http server
no ip http server
Default Configuration
HTTP server is enabled.
Command Mode
Global Configuration mode
Example
The following example enables configuring the device from a web browser.
Console(config)#
ip http server
11.2

ip http timeout-policy

Use the ip http timeout-policy Global Configuration mode command to set the
interval for the system to wait for user input in http/https sessions before
automatic logoff. Use the no form of this command to return to the default value.
Syntax
ip http timeout-policy
no ip http timeout-policy
Parameters
seconds—Specifies the maximum number of seconds that a connection is kept
open if no data is received or response data cannot be sent out. (Range: 0–86400)
idle seconds
[http-only | https-only]
11
167