Spanning-Tree Mst Configuration - Cisco Small Business 300 1.1 Series Administration Manual

Spanning-Tree Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following example configures the MSTP instance 1 path cost for
gigabitethernet port 9 to 4.
Console(config)#
interface gi9
Console(config-if)#

29.21 spanning-tree mst configuration

Use the spanning-tree mst configuration Global Configuration mode command to
enable configuring an MST region by entering the Multiple Spanning Tree (MST)
mode.
Syntax
spanning-tree mst configuration
Command Mode
Global Configuration mode
User Guidelines
For two or more switches to be in the same MST region, they need to contain the
same VLAN mapping, the same configuration revision number, and the same
name.
Example
The following example configures an MST region.
Console(config)#
spanning-tree mst configuration
Console(config-mst)#
Console(config-mst)#
Console(config-mst)#
spanning-tree mst 1
instance 1 vlan 10-20
region1
name
revision 1
cost 4
29
380