Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
Total: 1600 bytes
Left: 100 bytes
44.24 show lldp local
Use the show lldp local Privileged EXEC mode command to display the LLDP
information that is advertised from a specific port.
Syntax
interface-id
show lldp local
Parameters
Interface-id—Specifies a port ID.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
Privileged EXEC mode
Example
The following examples display LLDP information that is advertised from gi1 and
2.
Switch# show lldp local gi1
Device ID: 0060.704C.73FF
Port ID: gi1
Capabilities: Bridge
System Name: ts-7800-1
System description:
Port description:
Management address: 172.16.1.8
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported
44
671