Storm-Control Broadcast Level Kbps; Storm-Control Broadcast Level - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide

21.20 storm-control broadcast level kbps

Use the storm-control broadcast level Interface Configuration mode command to
configure the maximum rate of broadcast on a port. Use the no form of this
command to return to default.
Syntax
storm-control broadcast level kbps
no storm-control broadcast level
Parameters
kbps—Maximum of kilo bits per second of broadcast traffic on a port. (Range
70-1000000)
Default Configuration
1000
Command Mode
Interface Configuration mode (Ethernet)
User Guidelines
Use the storm-control broadcast enable Interface Configuration command to
enable storm control.
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
Example
console(config)# interface gi1
console(config-if)# storm-control broadcast level kbps 12345

21.21 storm-control broadcast level

Use the storm-control broadcast level Interface Configuration mode command to
configure the maximum rate of broadcast. Use the no form of this command to
return to default.
kbps
21
291