Show Snmp Filters - Cisco Small Business 300 1.1 Series Administration Manual

Network Management Protocol (SNMP) Commands
78-20269-01 Command Line Interface Reference Guide
Field
Views Read
Write
Notify

10.18 show snmp filters

Use the show snmp filters Privileged EXEC mode command to display the
configured SNMP filters.
Syntax
filtername
show snmp filters [
Parameters
filtername—Specifies the filter name. (Length: 1–30 characters)
Command Mode
Privileged EXEC mode
Example
The following example displays the configured SNMP filters.
Console# show snmp filters
Name OID Tree
------------ ---------------------
user-filter 1.3.6.1.2.1.1
user-filter 1.3.6.1.2.1.1.7
user-filter 1.3.6.1.2.1.2.2.1.*.1
Description
View name enabling viewing the agent
contents. If unspecified, all objects
except the community-table and
SNMPv3 user and access tables are
available.
View name enabling data entry and
managing the agent contents.
View name enabling specifying an inform
or a trap.
]
Type
---------
Included
Excluded
Included
10
165