Link Layer Discovery Protocol (Lldp) Commands; Lldp Run; Lldp Transmit - Cisco Small Business 300 1.1 Series Administration Manual

Link Layer Discovery Protocol (LLDP) Commands

44
Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
44.1

lldp run

Use the lldp run Global Configuration mode command to enable LLDP. To disable
LLDP, use the no form of this command.
Syntax
lldp run
no lldp run
Parameters
N/A.
Default Configuration
Enabled
Command Mode
Global Configuration mode
Example
console(config)# lldp run
44.2

lldp transmit

Use the lldp transmit Interface Configuration mode command to enable
transmitting LLDP on an interface. Use the no form of this command to stop
transmitting LLDP on an interface.
Syntax
lldp transmit
no lldp transmit
Parameters
N/A
44
648