Clear Lldp Table - Cisco Small Business 300 1.1 Series Administration Manual

Link Layer Discovery Protocol (LLDP) Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
In Auto mode, the Voice VLAN feature determines on which interfaces to advertise
the network policy TLV with application type voice, and controls the parameters of
that TLV.
To enable the auto generation of a network policy based on the auto voice VLAN,
there must be no manual pre-configured network policies for the voice application
In Auto mode, you cannot manually define a network policy for the voice
application using the
Example
console(config)# lldp med network-policy voice auto

44.19 clear lldp table

Use the clear lldp table command in Privileged EXEC mode to clear the neighbors
table for all ports or for a specific port.
Syntax
[interface-id]
clear lldp table
Parameters
interface-id—Specifies a port ID.
Default Configuration
If no interface is specified, the default is to clear the LLDP table for all ports.
Command Mode
Privileged EXEC mode
Example
console# clear lldp table gi1
lldp med network-policy (global)
44
command.
664