Show Interfaces Configuration - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active, but
were shut down by the system.
Example
The following example reactivates gi1.
Console# set interface active gi1

21.14 show interfaces configuration

Use the show interfaces configuration EXEC mode command to display the
configuration for all configured interfaces or for a specific interface.
Syntax
show interfaces configuration
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Example
The following example displays the configuration of all configured interfaces:
console# show interfaces configuration
[interface-id ]
21
283