Qos Wrr-Queue Threshold - Cisco Small Business 300 1.1 Series Administration Manual

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
tail-drop
wrr-queue
no wrr-queue
Parameters
tail-drop— Specifies the tail-drop mechanism.
Default Configuration
The tail-drop mechanism on an egress queue i
s disabled.
Command Mode
Global Configuration mode
User Guidelines
This command can only be used if Advanced mode is enabled.
Example
The following example enables the tail-drop mechanism on an egress queue.
Console(config)# wrr-queue tail-drop

41.28 qos wrr-queue threshold

Use the qos wrr-queue threshold Global Configuration mode command to assign
queue thresholds globally. Use the no form of this command to restore the default
configuration.
This command is only available in QoS advanced mode.
Syntax
qos wrr-queue threshold gigabitethernet
no qos wrr-queue threshold gigabitethernet
queue-id threshold-percentage
queue-id
41
586