Cisco Small Business 300 1.1 Series Administration Manual page 55

Macro Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Interface Configuration mode
User Guidelines
When multiple macros are applied on a single interface, the description text is a
concatenation of texts from a number of previously-applied macros.
You can verify your setting by entering the show parser macro description
privileged EXEC mode command.
Example
Switch(config) # interface gi2
Switch<config-if> #
Switch<config-if> #
Switch(config) # interface gi3
Switch<config-if> #
Switch<config-if> #
Switch # show parser macro description
Interface Macro Description
--------- --------------------------------------------------------
gi2 dup
gi3 duplex
-----------------------------------------------------------------
Switch(config) # interface gi2
Switch<config-if> #
Switch<config-if> #
Switch # show parser macro description
Interface Macro Description
-------- ---------------------------------------------------------
gi3 duplex
macro apply dup
end
macro apply duplex $DUPLEX full $SPEED 100
end
no macro description
end
3
56