Sntp Unicast Client Enable; Sntp Server - Cisco Small Business 300 1.1 Series Administration Manual

Clock Commands
78-20269-01 Command Line Interface Reference Guide
6.10

sntp unicast client enable

The sntp unicast client enable Global Configuration mode command enables the
device to use Simple Network Time Protocol (SNTP)-predefined Unicast clients.
Use the no form of this command to disable the SNTP Unicast clients.
Syntax
sntp unicast client enable
no sntp unicast client enable
Parameters
N/A
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the

sntp server

Global Configuration mode command to define SNTP servers.
Example
The following example enables the device to use SNTP Unicast clients.
Console(config)#
sntp unicast client enable
6.11 sntp server
The sntp server Global Configuration mode command configures the device to
use the Simple Network Time Protocol (SNTP) to request and accept Network
Time Protocol (NTP) traffic from a specified server (meaning to accept system
time from an SNTP server). Use the no form of this command to remove a server
from the list of SNTP servers.
6
107