Auto-Configuration
8
Auto-Configuration
78-20269-01 Command Line Interface Reference Guide
8.1
boot host auto-config
Use the boot host auto-config Global Configuration mode command to enable
auto configuration via DHCP. Use the no form of this command to disable DHCP
auto configuration.
Syntax
boot host auto-config
no boot host auto-config
Parameters
N/A
Default Configuration
Enabled by default.
Command Mode
Global Configuration mode
Default Configuration
Enabled by default.
Example
console(conf)# boot host auto-config
8.2
show boot
Use the show boot Privilege EXEC mode command to show the status of the IP
DHCP Auto Config process.
Syntax
show boot
8
133