Table of Contents
Advertisement
Virtual Local Area Network (VLAN) Commands
78-20269-01 Command Line Interface Reference Guide
30.7
interface range vlan
Use the interface range vlan Global Configuration mode command to configure
multiple VLANs simultaneously.
Syntax
vlan-range
interface range vlan
Parameters
vlan-range
vlan
—Specifies a list of VLANs. Separate nonconsecutive VLANs with
a comma and no spaces. Use a hyphen to designate a range of VLANs.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface VLAN range context are executed independently
on each VLAN in the range. If the command returns an error on one of the VLANs,
an error message is displayed, and the system attempts to configure the
remaining VLANs.
If a VLAN does not exist (ghost VLAN), some commands are not available under
the interface VLAN context. These are:
•
IGMP snooping control commands
•
Bridge Multicast configuration commands
Example
The following example groups VLANs 221 through 228 and 889 to receive the
same command(s).
Console(config)#
interface range vlan
Console(config-if)#
221-228, vlan 889
30
409
Advertisement
Table of Contents
