Show Cdp - Cisco Nexus 7000 Series Reference Manual

show cdp

show cdp
To display the interfaces that have the Cisco Discovery Protocol (CDP) enabled, use the show cdp
command.
Syntax Description all
entry
name name
global
interface
interface-type
traffic
interface-type
Defaults
None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the interfaces that have CDP enabled:
switch(config)# show cdp all
mgmt0 is up
Ethernet7/1 is down
Cisco Nexus 7000 Series NX-OS System Management Command Reference
430
show cdp {all | entry {all | name name} | global | interface interface-type | traffic interface
interface-type}
Displays all interfaces in the CDP database.
Displays CDP entries in the database.
Displays a specific CDP entry that matches a name.
Displays CDP global parameters.
Displays CDP parameters for an interface.
Displays CDP traffic statistics.
Type of interface.
Modification
This command was introduced.
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 30 seconds
CDP enabled on interface
Refresh time is 60 seconds
Hold time is 30 seconds
Show Commands
OL-25806-03