Clear Dot1X Statistics; Dot1X Host-Mode - Cisco Small Business 300 1.1 Series Administration Manual

802. 1 x Commands
78-20269-01 Command Line Interface Reference Guide

20.14 clear dot1x statistics

Use the clear dot1x statistics Privileged EXEC mode command to clear 802.1x
statistics.
Syntax
clear dot1x statistics [i
Parameters
interface-id
—Specifies an interface ID. The interface ID must be an Ethernet port.
Default Configuration
N/A
Command Mode
Privileged EXEC
User Guidelines
The command clears the statistics displayed in the show dot1x statistics
command
Example
console# clear dot1x statistics

20.15 dot1x host-mode

Use the dot1x host-mode Interface Configuration mode command to allow a single
host (client) or multiple hosts on an IEEE 802.1x-authorized port. Use the no form of
this command to return to the default setting.
Syntax
{multi-host | single-host | multi-sessions}
dot1x host-mode
Parameters
•
multi-host—Enable multiple-hosts mode.
•
single-host—Enable single-hosts mode.
nterface-id
]
20
266