Logging Aggregation On - Cisco Small Business 300 1.1 Series Administration Manual

Syslog Commands
78-20269-01 Command Line Interface Reference Guide
•
delete-rename—Specifies logging messages related to file deletion and
renaming operations.
Default Configuration
Enabled.
Command Mode
Global Configuration mode
Example
The following example enables logging messages related to file copy operations.
Console(config)# file-system logging copy
18.9

logging aggregation on

Use the logging aggregation on Global Configuration mode command to control
aggregation of SYSLOG messages. If aggregation is enabled, logging messages
are displayed every time interval (according to the aging time specified by
aggregation aging-time). Use the no form of this command to disable aggregation
of SYSLOG messages.
Syntax
logging aggregation on
no logging aggregation on
Parameters
N/A
Default Configuration
Enabled.
Command Mode
Global Configuration mode
18
logging
226