Show Interfaces Advertise - Cisco Small Business 300 1.1 Series Administration Manual

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide
Port Type Duplex Speed Neg
------ --------- ------ ----- -------- ----
gi1 1G-Copper Full
gi2 1G-Copper --
PO Type Duplex Speed
----- ------- ------ -----
Po1 1G Full

21.16 show interfaces advertise

Use the show interfaces advertise EXEC mode command to display
auto-negotiation advertisement information for all configured interfaces or for a
specific interface.
Syntax
show interfaces advertise
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Examples
The following examples display auto-negotiation information.
Console# show interfaces advertise
Port Type
---- ---------
-
gi1
1G-Copper
gi2
1G-Copper
ctrl
1000 Disabled Off
-- -- --
Flow
Neg ctrl
------- ----
10000 Disabled Off
[interface-id |
Neg Operational Link
Advertisement
-----
----------------------------
Enabl
e 1000f, 100f, 10f, 10h
Enabl 1000f
e
State Pressure Mode
------ -------- --
Up Disabled Off
Down -- --
Link
State
------
Up
21
285