Hostname; Reload - Cisco Small Business 300 1.1 Series Administration Manual

System Management Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following command switches to open Telnet session number 1.
Console> resume 1
5.5

hostname

The hostname Global Configuration mode command specifies or modifies the
device host name. Use the no form of the command to remove the existing host
name.
Syntax
name
hostname
no hostname
Parameters
Name—Specifies the device host name. (Length: 1-63). The hostname must start
with a letter, end with a letter or digit, and have as interior characters only letters,
digits, and hyphens.
Default Configuration
No host name is defined.
Command Mode
Global Configuration mode
Example
The following example specifies the device host name as 'enterprise'.
Console(config)#
hostname
enterprise(config)#
5.6

reload

The reload Privileged EXEC mode command reloads the operating system.
enterprise
5
82