History Size - Cisco Small Business 300 1.1 Series Administration Manual

User Interface Commands
78-20269-01 Command Line Interface Reference Guide
2.10

history size

The history size Line Configuration mode command changes the maximum
number of user commands that are saved in the history buffer for a particular line.
Use the no form of this command to reset the command history buffer size to the
default value.
Syntax
history size number-of-commands
no history size
Parameters
number-of-commands—Specifies the number of commands the system records
in its history buffer. (Range: 10–
Default Configuration
The default command history buffer size is 10 commands.
Command Mode
Line Configuration mode
User Guidelines
This command configures the command history buffer size for a particular line.
Use the terminal history size EXEC mode command to configure the command
history buffer size for the current terminal session.
The allocated command history buffer is per terminal user, and is taken from a
shared buffer. If there is not enough space available in the shared buffer, the
command history buffer size cannot be increased above the default size.
Example
The following example changes the command history buffer size to 100 entries for
Telnet.
Console(config)#
line telnet
Console(config-line)#
)
207
history size 100
2
40