Show Ip Igmp Snooping Groups - Cisco Small Business 300 1.1 Series Administration Manual

Internet Group Management Protocol (IGMP) Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Groups that are in IGMP version 1 compatibility mode:
IGMP snooping querier admin: Enabled
IGMP snooping querier oper: Enabled
IGMP snooping querier address admin:
IGMP snooping querier address oper: 172.16.1.1
IGMP snooping querier version admin: 3
IGMP snooping robustness: admin 2
IGMP snooping query interval: admin 125 sec oper 125 sec
IGMP snooping query maximum response: admin 10 sec oper 10 sec
IGMP snooping last member query counter: admin 2 oper 2
IGMP snooping last member query interval: admin 1000 msec oper 500 msec
IGMP snooping last immediate leave: enable
Automatic learning of Multicast router ports is enabled

31.18 show ip igmp snooping groups

The show ip igmp snooping groups EXEC mode command displays the Multicast
groups learned by the IGMP snooping.
Syntax
show ip igmp snooping groups [vlan
source ip-address
[ ]
Parameters
vlan-id
vlan —Specifies the VLAN ID.
address ip-multicast-address—Specifies the IP multicast address.
source ip-address—Specifies the IP source address.
oper 2
vlan-id address ip-multicast-address
] [
31
]
449