Show Arp - Cisco Small Business 300 1.1 Series Administration Manual

IP Addressing Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
Example
The following example deletes all dynamic entries from the ARP cache.
Console# clear arp-cache

35.11 show arp

Use the show arp Privileged EXEC mode command to display entries in the ARP
table.
Syntax
[ip-address ip-address] [mac-address mac-address] [interface-id]
show arp
Parameters
•
ip-address
ip-address
•
mac-address
mac-address
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
Since the associated interface of a MAC address can be aged out from the FDB
table, the Interface field can be empty.
If an ARP entry is associated with an IP interface that is defined on a port or
port-channel, the VLAN field is empty.
—Specifies the IP address.
—Specifies the MAC address.
35
487