Dhcp Relay Commands; Ip Dhcp Relay Enable (Global); Ip Dhcp Relay Enable (Interface) - Cisco Small Business 300 1.1 Series Administration Manual

DHCP Relay Commands

38
DHCP Relay Commands
78-20269-01 Command Line Interface Reference Guide
38.1

ip dhcp relay enable (Global)

Use the ip dhcp relay enable Global Configuration mode command to enable the
DHCP relay feature on the device. Use the no form of this command to disable the
DHCP relay feature.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Parameters
N/A
Default Configuration
DHCP relay feature is disabled.
Command Mode
Global Configuration mode
Example
The following example enables the DHCP relay feature on the device.
Console(config)#
ip dhcp relay enable
38.2

ip dhcp relay enable (Interface)

Use the ip dhcp relay enable Interface Configuration (VLAN, Ethernet,
Port-channel) mode command to enable the DHCP relay feature on an interface.
Use the no form of this command to disable the DHCP relay agent feature on an
interface.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
38
524