Voice Vlan Dscp; Voice Vlan Vpt - Cisco Small Business 300 1.1 Series Administration Manual

Voice VLAN Commands
78-20269-01 Command Line Interface Reference Guide
no voice vlan vpt
Parameters
vpt-value
vpt —The VPT value to be advertised (range 0-7).
Default Configuration
5
Command Mode
Global Configuration mode
Example
The following example sets 7 as the voice VLAN VPT. A notification that the new
settings are different than the old ones is displayed.
Console(config)#

voice vlan vpt

For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCPwill
cause the switch to advertise the administrative voice VLAN as static voice
VLANwhich has higher priority than voice VLAN learnt from external sources.
Are you sure you want to continue? (Y/N)[Y] Y
30-Apr-2011 00:24:52 %VLAN-W-BestLocal!=Oper: inconsistency detected, VSDP voice
VLAN configuration differs from best local. Best local is Voice VLAN-ID 104, VPT
5, DSCP 46
console(config)#30-Apr-2011 00:25:07 %VLAN-I-ReceivedFromVSDP: Voice VLAN updated
by VSDP. Voice VLAN-ID 104, VPT 7, DSCP 46
42.5

voice vlan dscp

Use the voice vlan dscp Global Configuration mode command to specify a value
of DSCP that will be advertised by LLDP in the Network Policy TLV. The no format
of the command returns the value to the default.
Syntax
dscp-value
voice vlan dscp
no voice vlan dscp
7
42
617