Interface Vlan - Cisco Small Business 300 1.1 Series Administration Manual

Virtual Local Area Network (VLAN) Commands
78-20269-01 Command Line Interface Reference Guide
30.6

interface vlan

Use the interface vlan Global Configuration mode command to enter the Interface
Configuration (VLAN) mode for a specific VLAN. After this command is entered, all
commands configure this VLAN. To configure a range of VLANs, use
range vlan.
Syntax
interface vlan vlan-id
Parameters
vlan-id
vlan —Specifies the VLAN to be configured.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
If the VLAN does not exist (ghost VLAN), some commands are not available under
the interface VLAN context.
The commands that are supported for VLANs but do not exist for ghost VLANs are:
•
IGMP snooping control commands
•
Bridge Multicast configuration commands
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and
subnet mask 255.255.255.0.
Console (config)# interface vlan
Console (config-if)#
1
131.108.1.27 255.255.255.0
ip address
30
interface
408