Ip Igmp Snooping Vlan Static - Cisco Small Business 300 1.1 Series Administration Manual

Internet Group Management Protocol (IGMP) Snooping Commands
78-20269-01 Command Line Interface Reference Guide
User Guidelines
A port that is a forbidden mrouter port cannot be a Multicast router port (i.e. cannot
be learned dynamically or assigned statically).
You can execute the command before the VLAN is created.
Example
console(config)# ip igmp snooping vlan 1 forbidden mrouter interface
31.6

ip igmp snooping vlan static

Use the ip igmp snooping static Global Configuration mode command to register
an IP-layer Multicast address to the bridge table, and to add static ports to the
group. Use the no form of this command to remove ports specified as members of
a static Multicast group.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameter
•
vlan-id
vlan —Specifies the VLAN.
•
ip-address
static
•
nterface-list
interface i
from one of the following types: Ethernet port or Port-channel.
Default Configuration
No Multicast addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
Static Multicast addresses can only be defined on static VLANs.
You can execute the command before the VLAN is created.
vlan-id ip-address [
static
vlan-id ip-address [
static
—Specifies the IP Multicast address.
—Specifies a list of interfaces. The interfaces can be
interface-list]
interface
interface-list]
interface
31
gi1/1/1
439