Rmon Event - Cisco Small Business 300 1.1 Series Administration Manual

Remote Network Monitoring (RMON) Commands
78-20269-01 Command Line Interface Reference Guide
Field Description
Startup Alarm The alarm that may be sent when this entry is
first set. If the first sample is greater than or equal
to the rising threshold, and startup alarm is equal
to rising or rising-falling, then a single rising alarm
is generated. If the first sample is less than or
equal to the falling threshold, and startup alarm is
equal falling or rising-falling, then a single falling
alarm is generated.
Rising The sampled statistic rising threshold. When the
Threshold current sampled value is greater than or equal to
this threshold, and the value at the last sampling
interval is less than this threshold, a single event
is generated.
Falling The sampled statistic falling threshold. When the
Threshold current sampled value is less than or equal to this
threshold, and the value at the last sampling
interval is greater than this threshold, a single
event is generated.
Rising Event The event index used when a rising threshold is
crossed.
Falling Event The event index used when a falling threshold is
crossed.
Owner The entity that configured this entry.
19.8

rmon event

Use the rmon event Global Configuration mode command to configure an event.
Use the no form of this command to remove an event.
Syntax
index {none | log | trap | log-trap} [community text] [description text]
rmon event
[owner name]
index
no rmon event
Parameters
•
index—Specifies the event index. (Range: 1–65535)
•
none— Specifies that no notification is generated by the device for this
event.
19
244