Show Snmp Groups - Cisco Small Business 300 1.1 Series Administration Manual

Network Management Protocol (SNMP) Commands
78-20269-01 Command Line Interface Reference Guide

10.17 show snmp groups

Use the show snmp groups Privileged EXEC mode command to display the
configured SNMP groups.
Syntax
groupname
show snmp groups [
Parameters
groupname—Specifies the group name. (Length: 1–30 characters)
Command Mode
Privileged EXEC mode
Example
The following example displays the configured SNMP groups.
Console#
show snmp groups
Name
Model
------------ ----
user-group
V3
managers-gro
V3
up
The following table describes significant fields shown above.
Field
Name
Security
Model
Security Level
]
Securit
y
Level Read
---- -------
priv Default
priv Default
Description
Group name.
SNMP model in use (v1, v2 or v3).
Packet authentication with encryption.
Applicable to SNMP v3 security only.
Views
Write Notify
------- -------
"" ""
Default ""
10
164